Redes de Computadores

NTP

200.144.93.196

200.144.93.195

Extreme - “x150”

configurar gerência
1. create vlan gerencia

2. configure gerencia tag 28

3. configure gerencia add ports 25,26 tagged

3.  configure gerencia ipaddress 172.22.252.xx/22        ----ip

4.configure iproute add defaut 172.22.252.1                   ----gw

5. save

pronto! switch já pode ser acessado por telnet

criar vlans - passo 1-2-3 (outro exemplo)

create vlan voip

configure voip tag 18

configure voip add ports all tagged

outras configurações:

configure snmp sysname “IDxxx - Setor”

configure snmp syscontact “[e-mail]”

configure snmp syslocation “endereço”

configure account “admin”    ---- senha

HP v1905-24

ip address 172.22.253.83 255.255.252.0
ip gateway 172.22.252.1
management-vlan 28

vlan port Ethernet 0 / 26

save...

acessar pleo browser colocar tagged port 26

configurar vlans

HP] user-interface vty 0 15

[HP-ui-vty0-15] authentication-mode password

[HP-ui-vty0-15] set authentication password simple careca

[HP-ui-vty0-15] user privilege level 3

[HP-ui-vty0-15] quit

HP V1910

ipsetup ip-address 172.16.253.100 255.255.128.0 default-gateway 172.16.254.254

http://172.16.253.100

Network

VLAN -> Create -> 28

VLAN Interface -> Create -> "172.22.x.x" _ "255.255.252.0"

IPv4 Routing -> Create -> Destination IP 0.0.0.0 - Mask 0.0.0.0 - Next Hop 172.22.252.1 - Interface 28

Colocar VLAN 28 na porta link - Tagged!

VLAN Interface -> Modify -> Select VLAN Interface_1 -> Admin Status_Down

VLAN Interface -> Remove -> Select VLAN ID 1 -> Remove Interface

http://172.22.x.x

Save...

Wizard:

Prencher dados

Device:

System Time

Users

Save...

HP A3100- 48 (A3600) (A5800)

Terminal - 9600/8/N/1

system-view [enter]

[HP] interface vlan-interface 1 [enter]

[HP-Vlan-interface1] ip address 10.0.0.1 255.255.0.0 [enter]

[HP-Vlan-interface1] quit

[HP] local-user admin [enter]

New local user added.

[HP-luser-admin] service-type telnet [enter]

[HP-luser-admin] service-type web [enter]

[HP-luser-admin] state active [enter]

[HP-luser-admin] authorization-attribute level 3 [enter]

[HP-luser-admin] password [enter]

Password: xxxxxxxx [enter]

Confirm: xxxxxxxx [enter]

[HP-luser-admin]

# Abrir um terminal

*Configurar a eth0 para 10.0.0.2

*Acessar via browser o ip 10.0.0.1

*Clicar no save

*Criar a VLAN 28 e taggear nas portas

*Menu VLAN Interface *Create* VLAN ID(28), IP e máscara (desligar IPv6)

*Menu IPv4 Routing * Create *

- Interface Vlan-interface28

- Destination IP Address 0.0.0.0

- Mask 0.0.0.0

- Next Hop 172.22.252.1  [Apply]

# Voltar ao menu VLAN Interface * escolher Modify

* Modificar a VLAN Interface 1 para Admin Status Down

HP A3100 - 24

system-view [enter]

[HP] vlan 28[enter]

[HP-vlan28] quit [enter]

[HP] interface vlan-interface 28 [enter]

[HP-Vlan-interface28] ip address 172.22.25x.xxx 255.255.252.0 [enter]

[HP-Vlan-interface28] quit

[HP] management-vlan 28 [enter]

[HP] ip route-static 0.0.0.0 0.0.0.0 172.22.252.1 [enter]

[HP] interface GigabitEthernet 1/0/26 [enter]

[HP-GigabitEthernet 1/0/26] port link-type hybrid [enter]

[HP-GigabitEthernet 1/0/26] port hybrid vlan 28 tagged [enter]

[HP-GigabitEthernet 1/0/26] quit [enter]