Prova Engenheiro de Redes
Por: rafaelmonteiroti • 13/6/2016 • Exam • 305 Palavras (2 Páginas) • 225 Visualizações
Prova de Engenheiro de Redes
Keep in mind while the assignment below uses Cisco, we are not a Cisco
shop and expect you to be able to transfer your knowledge to other
platforms as needed. Lack of Cisco-specific experience is fine and
this assignment will be evaluated based on networking concepts, not
your Cisco
IOS configuration skills (or lack of). Hardware we use
includes Dell, Juniper, Cisco and Force10 and we use Linux on
commodity hardware for pure layer 3 devices.
Use GNS3 or Packet Tracer to implement a design for a
basic datacenter network according to the following specifications.
Follow good practises in designing the topology:
- One big layer 2 network, 10.101.0.0/16. It should have a top-of-rack
access switch in each imaginary rack, redundant distribution switches
in each row and a redundant core. Assume 3 racks per row and 3 rows.
Have spanning tree properly configured and select a good root bridge.
- Include a second little datacenter with it's own layer 2 network,
192.168.10.0/24. Just use one access switch there and nothing else on
layer 2.
- Each datacenter should have redundant layer 3 routers. The two
datacenters should then be connected to each other and each have a
connection to the internet:
internet <---> DC1 <---> DC2 <---> internet
The network as a whole therefore has redundant internet connections.
- Use OSPF to distribute routes and make sure all devices can ping all
networks and the internet.
- Extra credit: Have the border routers use BGP to advertise the whole
network to the internet. Create some upstream routers for them to peer
with.
- Decide yourself what devices to use for what purpose.
- Any network hardware or link except access links and switches can go
down without downtime for any server.
- Access link or switch going down only results in downtime for
servers connected to that specific switch.
- You only have to create one server per access switch, it is assumed
empty ports on access switches are filled with servers.
...